Effect Of Nitration On Pressed Tio2 Photoelectrodes For Dye-Sensitized Solar Cells

Abstract

TiO2 films made by the pressing method and then nitrogen-doped by heat-treatment in nitrogen, oxygen and argon gas mixture have been studied and the effects of structural characteristics, optical and electrical properties on the efficiency of a cell reported. Nitrogen gas ratio (Φ ) in the doping procedure was varied from 0 to 0.024. HigherΦ resulted in decrease in film porosity, and XRD analysis of the TiO2 films showed that nitrogen doping induced a rutile-to-anatase phase transitions. SEM shows that the particle sizes of nitrogen doped films reduced with increase of Φ from an average of 36nm to 18nm. Optical measurements revealed that film transmittance improved and reflectance reduced in the visible light spectrum with nitrogen doping. Nitrogen doped TiO2 photoelectrodes have been found to be more sensitive to visible light spectrum and has a narrower band gap. Photoelectrochemical measurements showed a large anodic shift of the onset potential for the cathodic scans of the order of 0.24V. The overall energy conversion efficiency, short circuit current and open circuit voltages of the solar cell fabricated with nitrogen doped TiO2 photoelectrode were found to depend onΦ . The cell fabricated with nitrogen doped TiO2 photoelectrode had an overall efficiency of 0.70 % while the undoped had efficiency of 0.96 %.