Abstract:
Abstract
Effects of film thickness and electrolyte concentration on the photovoltaic performance of TiO2-based dye-sensitized solar cell (DSSC) were studied. Nanocrystalline anatase TiO2 thin films with varying thicknesses (3.2–18.9μμm) have been deposited on FTO/glass substrates by screen printing method as work electrodes for DSSC. The prepared samples were characterized by UV-Vis spectroscopy, Atomic Force Microscopy/Scanning Tunneling Microscopy (AFM/STM) and X-ray diffraction (XRD). The optimal thickness of the TiO2 photoanode is 13.5μμm. Short-circuit photocurrent density (JscJsc) increases with film thickness due to enlargement of surface area whereas open-circuit voltage decreases with increase in thickness due to increase in electron diffusion length to the electrode. However, the JscJsc and VocVoc of DSSC with a film thickness of 18.9μμm (7.5mA/cm2 and 0.687V) are smaller than those of DSSC with a TiO2 film thickness of 13.5μμm (9.9mA/cm2 and 0.734V). This is because the increased thickness of TiO2 thin film resulted in the decrease in the transmittance of TiO2 thin films hence reducing the incident light intensity on the N719 dye. Photovoltaic performance also depends greatly on the redox couple concentration in iodide∖∖triiodide. JscJsc decreases as the redox concentration increases as a result of increased viscosity of the solution which lowers ion mobility. Similarly, VocVoc decreases as the electrolyte concentration increases due to enhanced back electron transfer reaction. An optimum power conversion efficiency of 4.3% was obtained in a DSSC with the TiO2 film thickness of 13.5μμm and redox concentration of 0.03mol dm−3−3under AM 1.5G illumination at 100mW/cm2.
Keywords:
• TiO2 film thickness
• electrolyte concentration
• photovoltaic performance
• dye sensitized solar cell
• screen printing
